insignia usb 2.0 to ethernet adapter driver download

If there are still no lights after installing a new Ethernet cable, contact technical support.If the Ethernet cable is plugged in firmly, try a different cable.If the LEDs are not lit, verify that the other end of the Ethernet cable is plugged into a router or wall jack with an active connection.Repeat steps 2 - 4 using the other USB port.

Move your USB Ethernet adapter to the other USB port.Turn your meter off using the power switch.Make sure that the Ethernet cable and USB Ethernet adapter are plugged in firmly if no transfer rate is indicated.These lights indicate your connection's data transfer rate. Either the 10 or 100 LED indicators should be on (solid green).Check that the LEDs (lights) located on the USB Ethernet adapter are visible within one minute of turning on your meter.Make sure that your meter does not connect to a phone line or to a computer using PC Meter Connect.Solution 2: Check your meter's physical connection If restarting your meter does not resolve your issue, try Solution 2. Turn your power off with the power switch.There are four ways to troubleshoot this device try them in this order:

Insignia usb 2.0 to ethernet adapter driver download